新型双旋流平焰烧嘴的研制与应用

介绍了一种新型双族流平焰烧嘴的设计思路、结构参数及工业试验结果。其结构特点是每个部件都易装易卸，其煤气旋流器的位置可根据煤气压力变化进行调节，无需稳焰器就可保证煤气压力在较大范围波动时，都可形成稳定的平展火焰。     

Evolution of BET internal surface area in glassy carbon powder during thermal oxidation

It is demonstrated that glassy carbon powder can be thermochemically activated. During activation, a film with open pores is created on the glassy carbon particles. This film has a large internal surface area, which is accessible to liquids and gases. A simple model for the evolution of the internal surface area in glassy carbon powder during thermochemical gas-phase oxidation is also presented and compared with experimental data. Experimental results are in qualitative agreement with the model. We found that a sharp particle size distribution is desirable with regard to potential technical applications.     

垄作冷渍型稻田氮、磷、钾化肥适宜施量及施用方法研究

通过垄畦栽冷渍型稻田早、中稻化肥不同施量及施用方法的田间试验,建立氮、磷、钾化肥施用量与产量的回归方程,推导出早、中稻氮、磷、钾化肥最佳施用量;在施肥量相等情况下,深施比表施肥效好,钾肥不足情况下,以稻草代钾肥同样取得较好增产效果。     

The amylose and lipid contents,dimensions, and gelatinisation characteristics of some wheat starches and their A- and B-granule fractions

Starches isolated from 23 bread wheats (Triticum aestivum) and 26 durum wheats (T. durum) contained 26.3-30.6% (mean 29.1%) total amylose, 19.3–25.1% (mean 22.9%) apparent amylose and 783–1144mg 100g^?1 (mean 977 mg 100g^?1) lysophos-pholipids. Gelatinisation temperatures were 57.3–64.9°C (mean 61.8°C) and enthalpies 6.4–11.8 Jg^?1 (mean 9.7Jg^?1) in excess water, measured by differential scanning calorimetry. There were no correlations between any of these parameters. Starch granule size distributions were determined with a Coulter Counter and 100–channel analyser. A-granule mean volumes were 1235–2585μm³ (av. 1778), modal volumes 863–1804μm³ (av. 1264), mean diameters 13.9–16.0μm (av. 13.99), and specific surface areas 0.236–0.302m²g^?1. B-granule mean volumes were 35.4–100.4μm³ (av. 55.9), modal volumes 16.5–54.5μm³ (av. 27.7), mean diameters 3.66–5.07μm (av. 4.09), and specific surface areas 0.684–0.920m²g^?1. The B-granule contents of the starches were 12.8–34.6% (av. 27.3) by weight (sedimentation method) and 13.0–37.3% (av. 24.0) by volume (Coulter method), the latter being the more accurate method.     

鄂尔多斯西缘前陆盆地巨厚黄土地区地震采集技术

鄂尔多斯西缘前陆盆地表层地质地貌极其复杂，有巨厚黄土区、黄土-沙漠区及山前砾石-黄土区，独特的黄土地貌使得地震采集面临着诸多技术难题。根据以往巨厚黄土地区地震采集经验，采用多种方法系统地开展黄土表层结构精细调查，深入研究黄土地球物理特征及激发因素与表层黄土结构之间的关系，优选激发井位和井深，确保了激发效果；采用小道距、三线小线距、高密度空间采样技术，获得了高信噪比、高分辨率地震资料。研究表明，巨厚黄土地区地震采集时应优选激发井位和岩性，合理选择激发井深；坚持多深井组合激发、单井药量不宜过大总药量要大两项基本原则；采用高密度采样技术，提高采集资料的覆盖次数和信噪比。图10表1参15     

小型办公网络组网

通过实例,对小型办公网络组网中涉及到的需求设计、网络连接、网络设备、设备连接等进行了论述。     

充分灌与调亏灌溉条件下桃树滴灌的耗水量研究

本文研究了充分灌与调亏灌溉条件下桃树滴灌的耗水量。在田间设置有两个处理，其一是在整个生育期以蒸发量的80%进行充分灌溉；其二是在果实生长缓慢期以蒸发量的20%进行亏缺灌溉，而在其它季节以蒸发量的80%进行充分灌溉。利用石膏块土壤水分传感器和中子仪分别测量了根区土壤水势和土壤含水量的变化，并实测了果实生长量、枝条生长量和产量。利用水量平衡法得出了在上述两种滴灌条件下桃树不同生育期的日均耗水量与蒸发皿系数。与充分灌比较，调亏灌溉对产量没有影响，灌水量减少了32%，并有效抑制了枝条生长。     

机电排灌工程管理之我见

机电排灌工程是丘陵、滨湖地区的主要灌溉设施，必须建立适应市场经济的管理新机制，确保工程良性运行和巩固发展，满足不断发展的工农业生产需要。     

Design Methodology of the Structure of Postal Express Mail Networks of Aviation Channels in China

1　ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｏｒｄｅｒｔｏｉｍｐｒｏｖｅｔｈｅｑｕａｌｉｔｙｏｆｐｏｓｔａｌｓｅｒｖｉｃｅａｎｄｔａｋｅａｄｖａｎｔａｇｅｏｆａｕｔｏｍａｔｅｄｍａｉｌｓｏｒｔｉｎｇｅｑｕｉｐ ｍｅｎｔｓ,ｉｔｈａｓｂｅｅｎｄｅｔｅｒｍｉｎｅｄｔｏｃｏｎｓｔｒｕｃｔｔｈｅｐｏｓｔａｌａｒｅａｃｅｎｔｅｒｏｆｆｉｃｅｓｙｓｔｅｍｉｎＣｈｉｎａＰｏｓｔａｌＳｅｒ ｖｉｃｅ (ＣＰＳ) .ＴｈｅｃｒｕｘｏｆｔｈｅｐｒｏｂｌｅｍｆａｃｅｄｂｙＣＰＳｉｓｔｏｒｅｄｅｓｉｇｎｔｈｅｐｏｓｔａｌｃｏｍｍｕｎｉｃａ…     

MODELING LIQUID MASS TRANSFER IN HIGEE SEPARATION PROCESS

Correspondence concerning this paper should be addressed to Professor Richard S.H. Mah. Hsien-Hsin Tung is now affiliated with Department of Chemical Engineering, California Institute of Technology

Penetration theory is used to describe the liquid mass transfer in Higee separation process. Within a possible range of effective areas, it is shown that the predicted mass transfer coefficients are in reasonable agreement with the estimated mass transfer coefficients. The estimated coefficients were calculated from the experimental data and the possible effective areas. Hence it is concluded the penetration theory is generally applicable to describe liquid mass transfer in Higee separation process. The comparison also suggests that liquid mixing at the junctions of packing materials may be more complete in Higee process than in traditional process.